Description
APPLICATION:
Universal, one-component assembly adhesive, characterized by high initial adhesion of 100 kg / m².
It replaces screws, nails or pins.
Pattex FIX Power permanently joins wall and plinth strips, decorative panels, decorative profiles, wooden slats, door plates etc. The substance can also be used to fill small defects in the substructure and to bond materials such as; styrofoam, wood, metal, ceramics, glass, chipboard, plasterboard, plaster elements, cork, signboards, PVC-U cable ducts and similar materials.
Product Features:
- instant adhesiveness - 100 kg / m²
- ecological - no solvents
- waterproof and flexible
- indoor use
- it can be painted
- odorless
- requires one absorbent surface
- easy to clean
- fills cavities in the surface
Application temperature:
from + 10 ° C to + 25 ° C
Temperature resistance:
from -20 ° C to + 70 ° C
How to use:
bonded surfaces must be stable; they should be thoroughly cleaned of dust, rust, oil and substances that reduce adhesion of the glue. If the surface is uneven, it must be leveled out due to the fact that bonding properties of the adhesive depend on the absorbency of one of glued surfaces.
- Cut off the tip of the cartridge just above the thread.
Dosing tip should be cut at an angle. - Place cartouche in a special gun.
- Apply the adhesive with lines or dots to the substrate or the material to be glued.
Do not apply the glue directly on the edges.
Glue while the adhesive is moist (about 15 min). - Then press glued surfaces together.
- Immediately remove adhesive residue with a damp cloth.
